Speedway Address: NCQMA Speedway 1130 Speedway Blvd. Salisbury, NC 28146 704-637-1099 Mailing Address: NCQMA PO Box 607 Trinity, NC 27370	Revised 2.24.11 This area is for basic info and/or basic guidelines. All competitors must conform to the USAC Rule Book and all NCQMA rules and regulations. Failure to do so will result in penalties as described by NCQMA and/or USAC. Car Inspections: All cars will be inspected for mechanical and safety deficiencies and compliance with the rules at least once per year. Safety sheets need to be completed and signed by an NCQMA Official before Sign-ins. Print one Safety Sheet for each car and complete the bottom portion before safety inspection. USAC inspection decal is mandatory in order for a car to compete. The following decals are mandatory: (1) USAC shield--left side of car; (2) USAC .25 and/or Series Sponsor--right side of car; and (3) Hoosier tire--both sides of car. Safety Equipment: Helmets must meet or exceed 2000 or better Snell Foundation or SFI Foundation 24.1 youth spec helmet specifications. Driver Suits must be one or two piece fire resistant and meet SFI Foundation specifications 3.2A1 or higher. Jeans are not permitted. Gloves must meet SFI Foundation specifications 3.3 or higher. Neck Collar is mandatory and must be made of Nomex or equivalent, recommended SFI Foundation rating of 3.3 or higher. Arm Restraints are mandatory. Safety Belts must be web-type with quick release buckle; a minimum of 5-point belt is required; double shoulder straps are mandatory; life of belts shall not exceed four (4) years and must be date stamped by manufacturer. Fuel Tank: Aluminum fuel tanks are required and must have a minimum wall thickness of .050. Maximum fuel tank size is 140 ounces. Fuel tanks must be mechanically mounted to the frame preventing all movement within the tail cone section. A minimum of two (2) hose clamps must be used if hose clamps are used. Zip ties and duct tape are not permitted. Fuel tanks must be vented no more than 1" above the belly pan with no holes in the cap. Miscellaneous: Belly pans should not have open holes larger than 1/2 inch in diameter. All lead weights must be covered in a manner to keep from coming into contact with the driver. All weights must be securely bolted within the confines of the frame tubes, not to nerf bars, bumpers, or the roll cage. Cars must be equipped with a full brake pedal or positive heel stop.	Summer Series Jr. Honda - Gage Painter Sr. Honda - Sandor Sundem Hvy. Honda - Joshua Rummage Jr. Animal - Gage Painter Sr. Animal - Sam Hatfield Lt. 160 - Jake Ruggles/Ryan Repko Hvy. 160 - Joshua Rummage Lt. WF - Nolan Allison Hvy. WF - Trey Hutchens Championship Series Jr. Honda - Ryan Israel Sr. Honda - Jordan Mander Hvy. Honda - Lucas Hedrick Jr. Animal - Ryan Israel Sr. Animal - Ryan Repko Lt. 160 - Alex Murray Hvy. 160 - Joshua Rummage Lt. WF - Alex Murray Hvy. WF - Joshua Rummage